ALT7

ALT7

ALT7

Category:

Automatic PFC system Low Heat model made of a galvanized metal sheet structure for wall fixing and door in coated metal sheet RAL 7035, with top cover and frontal plate fixed by screws. Dimensions (mm) 15755x1370x600 HxWxD. Available in both ST version, with reinforced three-phase capacitors and AT version, with three phase reinforced Nitrogen capacitors. Power from 1000 to 1200 kVAr Available in both version AC/ST with reinforced three-phase capacitors and detune reactors 189 Hz and in version AC-AT with three phase nitrogen capacitors and detune reactors 189 Hz. Powers available: from 600 to 800 kVAr TECHNICAL DATA Three-pole disconnector with a door blocking system. Automatic regulator RDM 12 Standard 12 batteries with a LCD back-lighted digit display for ST and AT versions Automatic regulator RDM 12 Standard 12 batteries with LCD back-lighted digit display for AC-ST and AC-AT versions Auxiliary circuit voltage 400 V (available on demand 230V or 110V). Fuse protection of auxiliary circuits. Removable modular racks with: Contactors equipped with limiting resistors and suitable to the insertion of capacitive banks. NH00 fuses for capacitor banks protection. Reinforced ST three-phase capacitors with dielectric in metal polypropylene with discharge resistors, or AT three-phase Nitrogen capacitors with discharge resistors. N07VK flame resistant cables. Forced ventilation with fans on the top with alarm thermostat for overtemperature. Internal floor installation . Cable entry from the bottom. Reference standards CEI EN61921,IEC60439,IEC60831-1


ALT7 2014 UK.pdf

You may also like…